|
Made for high accuracy
Main characteristics:
- Nominal current measurement: from 60 and 1000 ADC
- Excellent linearity, better than 3 ppm
- High resolution
- Initial offset between 40 to 80 ppm
- Very low offset drift: between 0.5 to 2.5 ppm/K
- Overall accuracy @ IPN @ +25°C: between < +/- 0.0044 % and < +/- 0.02725 %
- Wide frequency bandwidth up to 800 kHz (+/- 3 dB)
- 2 years warranty
Features:
- DC, AC pulse currents' measurements with galvanic isolation
- Fluxgate technology
- Electrostatic shield between primary and secondary circuit
- Power supply +/-15 Volt
- Operating temperature range from +10 to +50°C
- D-Sub 9 male interface output
- Current output
- Really quick response time (<250 ns)
Standard compliance:
- European Directive EMC 2004 / 108 / EEC: CE Marking
- Using UL94-VO recognized materials
- Typical applications:
- Feedback element in high performance gradient amplifiers for MRI
- Feedback element in precision current regulated devices (power supplies…)
- Precise and high stability inverters
- Medical equipment
- Energy measurement
- Power analyzers
- Calibration units
Remarks:
- Current overload capability
- Additional output indicating the transducer state
- A LED shows normal operation
- Special existing models for special features are available:
- IT 700-SPR: Programmable from 80 A up to 700 A by steps of 10 A with programming plugs
- IT 700-SB: Voltage output +/- 10 V
- IT 1000-S/SP1: High Bandwidth up to 500 kHz (+/- 3 dB)
|
