HO

Intelligent & interactive current transducers HO 25 -NPPR & -NSMPR: Programmable models by users: Three programmable ranges: 8 ARMS, 15 ARMS, 25 ARMS (25 ARMS set by default), Overcurrent detection with programmable thresholds (up to 5 x Ipn), Programmable response time (from 2 to 6 µs), Up to 4 programmable internal references voltages (0.5, 1.5, 1.65, 2.5 V), Through hole or surface PCB mounting. HO 8, 15, 25 -NP & -NSM: Already programmed models (fixed setting parameters), Access to voltage reference, Low offset and gain drift, Measuring range up to 2.5 x Ipn, Small current measurements from 2.67 to 25 ARMS nominal thanks to multirange configuration, Small design (12 (W) x 23 (L) x 12 (H)), High accuracy at 25°C: 1% of Ipn, at 105°C: 3.8% of Ipn,,Creepage & clearance distances: 8 mm + CTI 600, Single supply 0, +5 V or 0, +3.3 V. Through hole (-NPPR or - NP) or surface (-NSMPR or -NSM) PCB mounting models. Operating temperature range: -40°C to +105°C. Voltage output (0.8 V @ Ipn). Bandwidth DC... 100 to 600 KHz (-3 dB),Creepage & clearance distances: 8 mm + CTI 600, Single supply 0, +5 V or 0, +3.3 V. Through hole (-NPPR or - NP) or surface (-NSMPR or -NSM) PCB mounting models. Operating temperature range: -40°C to +105°C. Voltage output (0.8 V @ Ipn). Bandwidth DC... 100 to 600 KHz (-3 dB)

Model details

HO 8-NP-0000

2.67 or 4 or 8 ARMS nominal depending on the defined primary layout (Primary multiturns design). Through hole PCB mounting model.

Series
HO
Measurement
電流センサ
Nominal Value
8 A
Measuring Range
20 A
Second. Nominal Signal
電圧
Second. Nominal Signal Value
瞬時 2.5 +/- 0.8 V
Primary Signal
AC + DC
Supply Voltage
外部DCユニポーラ
Supply Voltage Range
5 - 5 V
Accuracy
1 %
Op. Temperature
-40 °C / 105 °C
技術
オープンループ・ホール効果
Mounting
基板
アプリケーション
ドライブ
電源
再生可能エネルギー
溶接
PICTURE
FRONT
BACK
LEFT
RIGHT
ダウンロード

Relative information

注文

連絡先

シリーズ

同じシリーズの製品

HO 15-NP-0000

5 or 7.5 or 15 ARMS nominal depending on the defined primary layout (Primary multiturns design). Through hole PCB mounting model.

HO 15-NP/SP33-1000

5 or 7.5 or 15 ARMS nominal depending on the defined primary layout (Primary multiturns design). Through hole PCB mounting model. Single supply +3.3V

HO 15-NSM-0000

5 or 7.5 or 15 ARMS nominal depending on the defined primary layout (Primary multiturns design). Surface PCB mounting models

HO 25-NP-0000

8.33 or 12.5 or 25 ARMS nominal depending on the defined primary layout (Primary multiturns design). Through hole PCB mounting model.

HO 25-NP/SP33-1000

8.33 or 12.5 or 25 ARMS nominal depending on the defined primary layout (Primary multiturns design). Through hole PCB mounting model. Single supply +3.3V

HO 25-NSM-0000

8.33 or 12.5 or 25 ARMS nominal depending on the defined primary layout (Primary multiturns design). Surface PCB mounting models

HO 25-NSM/SP33-1000

8.33 or 12.5 or 25 ARMS nominal depending on the defined primary layout (Primary multiturns design). Surface PCB mounting models. Single supply +3.3V

HO 8-NP/SP33-1000

2.67 or 4 or 8 ARMS nominal depending on the defined primary layout (Primary multiturns design). Through hole PCB mounting model. Single supply +3.3 V

HO 8-NSM-0000

2.67 or 4 or 8 ARMS nominal depending on the defined primary layout (Primary multiturns design). Surface PCB mounting models

HO 8-NSM/SP33-1000

2.67 or 4 or 8 ARMS nominal depending on the defined primary layout (Primary multiturns design). Surface PCB mounting models. Single supply +3.3V

HO 25-NPPR

Programmable by users: 3 ranges 8, 15, 25ARMS (25ARMS set by default), Thresholds for overcurrent detection (up to 5xIpn), Response time (2 to 6µs), 4 internal ref. voltages (0.5, 1.5, 1.65, 2.5V). Through hole PCB mounting, Single supply +5V