ITZ

Rack mounted (fix gain or programmable) current transducers. Made for ultra high accuracy. 14 models. DC, AC pulse currents' measurements from 40 to 24000 ADC nominal with galvanic isolation. Excellent linearity, from 1 to 10 ppm. High resolution. Initial offset: < 2 ppm. Very low offset drift: from 0.1 to 0.6 ppm/K. Overall accuracy @ Ipn @ +25°C: between < +/- 3 ppm and < 12 ppm. Wide frequency bandwidth from DC up to 500 kHz (+/- 3 dB). Closed-Loop Fluxgate technology. Electrostatic shield between primary and secondary in the heads. Power supply 100-240 VAC, 50-60 Hz. Products made up of one measuring head in a side and one separated electronic in the other side connected together via a cable. Operating temperature range from +10 to +40°C for the electronics and from 0 to +55°C for the measuring heads. D-Sub 15 female connector used for the analogue output. D-Sub 9 male connector used for the status output. Really quick response time (from <1 µs to <2 µs). 600 A and 2000 A models are programmable in the needed range thanks to some programming plugs to add on the measuring heads. 5 measuring heads are available according to the current to measure and to the aperture needed for the primary conductor (from 25.4 mm up to 150.3 mm diameter).

モデル詳細

ITZ 24000-S FLEX ULTRASTAB

High accurate current transducer. 24000 ADC nominal. Current output.

シリーズ
ITZ
測定
電流センサ
公称値
24000 A
測定範囲
24000 A
二次公称信号
電流
二次公称信号値
瞬時 3000 mA
一次信号
AC + DC
電源電圧
外部AC
電源電圧範囲
100 - 240 V
精度
0.0008 %
動作温度
10 °C / 40 °C
技術
クローズドループ・フラックスゲート IT タイプ
取り付け
パネル
アプリケーション
高精度
ITZ 24000-S FLEX ULTRASTAB
代理店からのご注文

在庫確認

シリーズ

同じシリーズの製品

ITZ 2000-SBPR FLEX ULTRASTAB

High accurate current transducer. 2000 ADC nominal. Current output and voltage +/- 10 Volt output, Programmable in the range 125 A to 2000 A with programming plugs

ITZ 2000-SPR FLEX ULTRASTAB

High accurate current transducer. 2000 ADC nominal. Current output, Programmable in the range 125 A to 2000 A with programming plugs

注文

連絡先