The HOYS and HOYL product families are highly performing current sensors relying on the hall effect technology (open loop). They are to be mounted on busbars with large apertures.
The HOYS and HOYL current transducers benefit from overcurrent detection set at 2.93 x Ipn on a dedicated connection, short response time, low offset and gain drift.
These products are dedicated to the industrial domain.
- Open loop multi-range current sensor
- Voltage output
- Single supply +5 V
- Overcurrent detect 2.93 × IP N (peak value)
- Galvanic separation between primary and secondary circuit
- Low power consumption
- For busbar mounting
- Aperture: 21.5 × 13 mm (HOYS Series)
- Aperture: 40 × 13 mm (HOYL Series)
- Factory calibrated
- Mating JST connector:
- housing PAP-05V-S
- contact SPHD-00xT-P0.5
- Low offset drift
- Over-drivable Uref
- Creepage / clearance > 10.5 mm
- Fast response
- Low profile 2 mm pitch connector for 22 to 28 AWG wire.
HOYS and HOYL current sensors are designed for industrial applications such as:
|Product||Document||Primary nominal RMS voltage||Supply Voltage range||Op. Temperature|
|HOYS 100-S-0100||100 A||5 to 5||-40 to 105 °C|
|HOYS 100-S/SP33-1106||100 A||3.3 to 3.3||-40 to 105 °C|
|HOYS 200-S-0100||Datasheet||200 A||5 to 5||-40 to 105 °C|
|HOYS 200-S/SP33-1106||Datasheet||200 A||3.3 to 3.3||-40 to 105 °C|
|HOYS 400-S-0100||Datasheet||400 A||5 to 5||-40 to 105 °C|
|HOYS 400-S/SP33-1106||Datasheet||400 A||3.3 to 3.3||-40 to 105 °C|
|HOYS 500-S-0100||Datasheet||500 A||5 to 5||-40 to 105 °C|
|HOYS 500-S/SP33-1106||Datasheet||500 A||3.3 to 3.3||-40 to 105 °C|
|HOYS 560-S-0100||Datasheet||560 A||5 to 5||-40 to 105 °C|
|HOYS 560-S/SP33-1106||Datasheet||560 A||3.3 to 3.3||-40 to 105 °C|
Looking to receive samples or a quotation? Please click on the contact button below and provide us with the information you need on this product series. Our sales team will get back to you shortly.