CAS - CASR - CKSR
CAS:
Compact Fluxgate based current transducers single supplied (+5V).
3 primary pins.
CASR:
Compact Fluxgate based current sensors single supplied (+5V) with reference access 3 primary pins.
CKSR:
Compact Fluxgate based current transducers single supplied (+5V) with reference access 4 primary pins.
Higher creepage and clearance distances.
CAS - CASR - CKSR

Main characteristics:
- Low offset and gain drift
- Measuring range up to 3 x IPN
- 12 multi-range models ( 4 models for each type)
- PCB mounting
- Small AC&DC isolated current measurements from 1.5 to 50 ARMS nominal (6A, 15A, 25A and 50A models)
- Compact design
- Only 2.93 cm2 as PCB mounting area is needed to support the 9g of these transducers
- High accuracy at +85°C:
- CAS: 2.5 to 3% of IPN
- CASR & CKSR: 1.2 to 1.8% of IPN
Features:
- Isolation test voltage: up to 4.3KVRMS / 50 Hz / 1 min
- Operating temperature range: -40°C to +85°C
- Voltage output
- Bandwidth DC to 300 KHz (+/- 3dB), 200KHz (+/- 1dB)
- Fast response time <0.3µs
- CASR & CKSR: Reference access on additional pin
- CKSR: Different primary footprint with 4 pins for higher creepage and clearance distances (8.2 mm) for higher insulation
- Each model is multi-range according to primary connection configuration