HO 40...150-NP Series
High performance, cost effective, multirange current sensors.
Through hole PCB mounting with integrated 4 primary conductor pins.
HO 40...150-NP Series

Main characteristics:
- DC&AC isolated current measurement with 4 multirange models: 40 ARMS, 60 ARMS, 120 ARMS, 150 ARMS
- Overcurrent detection set @ 2.93 x IPN on a dedicated pin
- Short response time: 2.5 µs
- Access to voltage reference
- Low offset and gain drift
- Measuring range up to 2.5 x IPN
- Small design (20 (W) x 41 (L) x 27 (H))
- High accuracy:
- at 25°C: 1% of IPN
- at 105°C: 3.4% of IPN
- Creepage & clearance distances: 8 mm + CTI 600
Features:
- Single supply 0, +5 V or 0, +3.3 V
- Isolation test voltage: up to 4.3 KVRMS / 50 Hz / 1 min
- Through hole PCB mounting models for primary and secondary pins
- Multirange primary conductor for small current measurements from 10 to 150 A nominal (3 primary pins configuration for each model)
- Operating temperature range: -40°C to +105°C
- Voltage output (0.8 V @ IPN)
- Bandwidth DC... 250 KHz (-3 dB)